Site : http://www.diatex.fr
Diatex
56 Chemin des sources
69230 Saint genis Laval
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here
Diatex
> Our divisions
> Composite Division
> Products
> Vacuum infusion
>> Bagging films
Products
Bagging films
|
PO120 is the new generation extra large extruded advanced copolymer. It has exceptional conformable characteristics, particularly when applied to awkward shapes with deep recesses or undercuts. It permits the moulding of complex forms. It has release properties and can be used in direct contact to the resin. This film behaves 3 coats : 2 auto-release copolymer coats and copolyamide coat in the middle. Maximum width 16 m ! This is a styrene resistant film and non porous.i.e. could be used for both vacuum moulding or vacuum infusion technologies with epoxy or polyester.
|
|
PA205 and PA232 are the standard polyamide bagging films.
| Designation | Max Temp | Thickness | Width | Length or surface |
Vacuum elongation |
Auto- release |
Use with resin* |
| PO180 | 180°C | 50 & 75µ | 3/4/5/6/8/10m 12 m |
800m² | 400% | Yes | E,P, VE, EL |
| PO180T | 180°C | 50µ | 0.31/0.60/0.80m 1.20m TUBE |
200 m | 400% | Yes | E,P, VE, EL |
| PA205 | 205°C | 50 & 75µ | 1.5 to 4.6m | 250 m | Poor | Yes | E, P, VE, EL |
| PA205 HF | 205°C | 75µ | 1.6m | 125 m | Poor | Yes | E,P |
| PA232 | 232°C | 50 & 75µ | 1.5 to 3.1m | 250 m | Poor | Yes | E, P, VE, EL |
| PO120 | 120°C | 75µ | 4, 6, 8, 10,16m | +/- 800 m² | 400% | Yes | E, P, VE, PH, EL |
| PO120 | 120°C | 80µ | 12m | 75 m | 400% | Yes | E, P, VE, PH, EL |
* resin code : E = epoxy - P = polyester - VE = vinylester - PH = phenolic - EL = elastomer - TP = thermoplastic.
