Back home page
ContactFAQTelepaymentSite mapFrench version
ProductsNewsDiscover DIATEX
 
 


EXPOPROTECTION EXHIBITION
PARIS NORD VILLEPINTE FROM 4/11 TO 7/11 2008

INTERNATIONAL TRADE FAIR FOR PROTECTION AND SAFETY

HALL 5 PART WORK WEAR


EXPOPROTECTION EXHIBITION



VACUOPEEL - vacuum moulding
Good news for the vacuum moulding process! DIATEX the inventors of VACUOPEEL

Save money, optimised your production ! A revolution in the vacuum moulding process. VACUOPEEL™ is an evolution of the VACUOPLEX™ : a 3 products combination with : • a peel ply • a perforated film • a breather/bleeder felt The only difference is on the fact that you can remove the VACUOPEEL™ in 2 times after the curing process : 1. you remove the bleeder and the perforated film. 2. you remove the peel ply .

NEW : VACUOPEEL ECO is now available. Also VACUOPEEL for phenolic systems.


Data sheet and samples are available now.

VACUOPEEL - vacuum moulding



AIR ET COSMOS
Press article

AIR ET COSMOS



Qualité ISO 9001-v2000
Bureau Veritas Certification December 2006
The total solution offered for certification by Bureau Veritas covers the key strategic fields of our operation: quality, health & safety, environment and social accountability. We are proud to anouce our new challange : certification EN9100 in 2007.

Qualité ISO 9001-v2000



JEC Composites Paris 2008
Porte de Versailles From 1 to 3 of April

The latest applications, new materials and technologies for all sectors of application are exhibited, making the JEC Composites Show a genuine showcase for global composite solutions. DIATEX and all the partners ZYVAX FLEXZ WATERWORKS, AEROFORM, COMPOSITE INTEGRATION, MIL'S are waiting for you! www.jecshow.com


JEC Composites Paris 2008



RESIN INFUSION - NEW INFUSION NET
new solution for vacuum infusion september 2007

Very often, DIATEX develops new bagging materials and accessories for vacuum infusion process. We invite you to test our new infusion net ISONET. ISONET is a technical net bleeder fabric which has a balanced structure allowing a similar air and resin flow in every direction. This new product will allows you more comfort for your vacuum infusion. With DIATEX, improve your quality, your performances and your serenity…100% resininfusion


RESIN INFUSION - NEW INFUSION NET



RTM accessories - RTM equipment
DIATEX and Composite Integration September 2007

Composite Integration Ltd, Distributed in France by DIATEX, are committed to excellence in the development and world-wide marketing of innovative and workable solutions for using the Resin Transfer Moulding (RTM) process in composite product manufacturing.

DIATEX offers a large range of RTM accessories, tranings, overlay etc...


RTM accessories - RTM equipment



vacuum infusion for composites
vacuum infusion for composites materials September 2007
Very often, DIATEX develops new bagging materials and accessories for vacuum infusion process. In September, we invite you to test our new adhesive peel ply and adhesive glass screen tape in order to set fibbers. Those new products will allows you more comfort for worker. Our adhesive glass screen tape will replace all your hazardous spray generally used in the composite industry. With DIATEX, improve your quality, your performances and your serenity… Bagging film maximum width 15m, high performance perforated film, stabilised net bleeder, sealant tape, eco peel ply, adhesive peel ply, adhesive glass screen, accessories… 100% resininfusion !

vacuum infusion for composites



FIREWALL for light aircrafts
News 2005 July 2005
How to save between 2 and 5 kg by aircraft ?
Using DIAFIREWALL, from AIRBUS A380 technology for you !
This material is made with 0.5mm of MICA [{Na,K,Ca,Mg}{Al,Mg,Fe,Li}2-3{Si,Al}4O10{OH,F}2], colour : grey, weight : 480 g/m² add with 2mm of CERAMIC, for a final weight of 1 kg/m² !!!!!!!!
The MICA side resist to a direct flamm until 1100°C during 4mn ......
The CERAMIC side resist until 1600°C ...........
According with FAR 25-856 part b
Availaible in stock

FIREWALL for light aircrafts



WATER BASE RELEASE AGENT ZYVAX
Innovation & Reliability for RTM & resin infusion August 2007
Innovation&Reliability: Zyvax applies performance-based, scientific expertise and leading-edge manufacturing process knowledge to develop pace-setting products that deliver consistent performance. When it comes to slipcoats and mold releases, proven performance is the expectation. Consistency and ease of use are absolutes. No surprises. At Zyvax, discovery is what our global reputation is built on. ZYVAX = WATER SHIELD, ENVIROSHIELD, WATER CLEAN, SEALPROOF. WATERWORKS = PREFLIGHT, DEPARURE, FRESHSTART
A fantastic solution for vacuum infusion (resin infusion) and RTM.

WATER BASE RELEASE AGENT ZYVAX



AERONAUTIC TRAINING WEEK END
Learn how to mount canvas …
In a small group of 7 participants maximum, come and join us for a week-end in French language ... You will learn in an environment of friends how to mount canvas coverings yourself, according to your own guiding principle or depth … with our Polyester fabrics, DACRON, DIOLEN You will be awarded a certificate for your efforts and the assurance to be able to mount canvas without error, at your own height. Inscription 00 33 (0)4 78 86 85 00.
Contact Laure for more informations in English !

AERONAUTIC TRAINING WEEK END



FLYER III A, public take-off !
Congratulation to SARTHE AERO RETRO July 2006
Le Mans, close from the famous track of "24th hours of Le Mans", first public take-off for the FLYER III A, designed by the WRIGHT brothers.
Rebuilt by the association of homebuilders, this wonderful airplane of 1908 !
Thank's for the partners like DIATEX and local sponsors.
Covering with DIATEX 1000 and our range of dopes.

FLYER III A, public take-off !



RTM : NEW INJECTION VALVE
V400 THE REFERENCE September 2007

The V400 Injection Valve (patent pending) is highly reliable in operation with very low maintenance requirements. Its unique design enables use with filled, unfilled, DCPD polyester and epoxy resin systems without modification. The ‘nose’ design, and careful positioning of the material ports, allows use in deep mould structures with limited access. Ease of maintenance was a prime consideration during design, and the valve can be simply disassembled if necessary.
By careful value engineering the valve has been made affordable for use with VM/RTM light.


RTM : NEW INJECTION VALVE



Page Top 58 Chemin des sources 69230 ST-GENIS-LAVAL (F) - tel 00 33 (0)4 78 86 85 00 - fax 00 33 (0)4 78 51 26 38 - © DIATEX 2004