 |
|
 |
 |
          |
 |
| Primary paints, for metal protection |
| Intergard 90 Green
Primary Paint, réf.E4120 |
| 100 % two-component epoxy
anticorrosion primary paint pigmented with strontium chromate.
Replaces the old zinc chromate certified by AIRBUS – BRITISH
AEROSPACE - AECMA. |
| Internal and external protection
of aircraft, allowing to obtain a chemical resistance and a
high corrosion resistant behavior on supports prepared with
SURFACE CLEANER. |
Highly resistant to impact,
synthetic lubricants, ester phosphate hydraulic liquids of the
type HYJET IV, salty sprays, humid atmosphere, kerosene, thread-like
corrosion.
Covering capacity :
10 to 12 m² per liter and per coat with a thickness of
20 to 25 µ and a loss of 40 %.
Dry film thickness : 20 à
25 µ
Covering time : minimum 2 h
- maximum 72 h
Oven drying :
Predrying : 30 min at room temperature.
In oven : 20 min at 60° C before application of next coat
or 1 h at 80° C or 15 min at 120° Cif the primary coat
is not recovered with another paint coat.
Mixing ratio :
Base E4120 : 1 volume
Hardener E0611 : 1 volume
Diluent E0515 : where applicable. |
| Surface Cleaner
in 1 or 5 liters |
| Very powerful degreasing agent
for aircraft metals, allowing to obtain a 100 % perfectly clean
surface. To be used before application of primary paints, finish
paints, stripping agents, for composites. |
|
 |
 |
|
