 |
|
 |
 |
        |
 |
| Diatex Isola System |
| The Diatex Isola system allows an effective
protection of the cultures against pollination anemophilous
and entomophilous. |
Net F.1132
Protection against the insects
ISOLA tent |
Perimeter low reinforced
to be buried.
Seam realized with double needle
Optimal and uniform distribution of the efforts.
Oversize straps and loops.
Easy handling
Very high mechanical strength
Entirely adjustable tent in tension (every 1,50 m according
to the model).
No starter of tear.Water-tight muffs for the passages of feet
(tents>6 m)
The eight bent edges absorb most of the efforts with the straps
which must be always tended Metal reinforcements located outside
the cage
Maximum safeguarding of the swarm (if insects inside). |
| DIATEX door (Patented Pattern) |
|
|
Advantages
Time of opening :
approximately 30 seconds.
Closing with cursor is protected from the bad weather,
projections of muds and especially of tearings.
Lifetime higher than 4 years under normal conditions of
use |
|
The wind generates tension
loads.
One needs 100% of safety in culture.
Solutions
:
An exclusive process of absorption of the tension loads.
A microporous closing with cursor, flexible rise (bellows).
Various possible forms: C - U - L - I
The door is entirely adjustable in tension (plastic loops). |
|
A Diatex Isola structure
63 (6 X 3 m), for example, is made up of :
A central element including :
-2 legs, 6 struts, 3 horizontal cross-pieces, 2 basic crosses
(collar + bolts + cable)
An element of end including :
-4 legs, 6 struts, 4 horizontal cross-pieces, 4 basic crosses
(collar + bolts + cable) |
| Technical characteristics |
Tubes
feet and cross-pieces : diameter 32 mm X 1,5 mm thickness
Struts : diameter 32 mm
x 1,5 mm thickness
Collars and hooks : Special
Manufacture DIATEX
Bolts : Standard (French
norms)
Wire : N16 |
Closing with detachable cursor
+ removable interior separating partition (with or without door).
Half is located on the cage and other half on the partition.
This option is valid for all the system except DIATEX ISOLA
33.
Double reinforced roof, adjustable in tension, with spillplate
of foot (hot galvanized metal) :
> Tight muffs for passage of pipes with various applications
:
> Drop by drop, brumisation, heating, dynamic ventilation,
cooling system, etc. |
1.
To bury the base with precaution.
2. To insert the basic crosses
and the legs
3. To mount the other tubes
and to tighten iron wire.
4.
To raise the fabric tent and to put in tension.
5. To sprinkle the bottom
of the tent in order to pack the ground.
For your tents of insulation, contact us: we will choose together
the solution with your need...
Choice of dimensions (manufacture
to measure or standards manufacturers).
Choice of the grids according
to the type of pollination
Choice of the metal structures and
openings (slides, velcro, exclusive system DIATEX).
Assembly and uses |
|
 |
 |
|
