 |
|
 |
 |
    |
 |
| Bagging films for vacuum infusion |
PO120 is the new generation
extra large extruded advanced copolymer. It has exceptional
conformable characteristics, particularly when applied to awkward
shapes with deep recesses or undercuts.
It permits the moulding of complex forms. It has release properties
and can be used in direct contact to the resin.
This film behaves 3 coats : 2 auto-release copolymer coats and
copolyamide coat in the middle. Maximum width 15m! |
 |
This is a styrene resistant
film and non porous.i.e. could be used for both vacuum moulding
or vacuum infusion technologies with epoxy or polyester.
PA205 and PA232 are the standard polyamide bagging films. |
| Designation |
max.
Temp.
|
Thickness |
Width |
Length or
surface |
Vacuum
elongation |
Auto-
release |
Use with
resin* |
| PA205 |
205°C |
50 et 75µ |
1.5 to
4.6 m |
250 m |
Poor |
YES |
E, P, VE, EL |
| PA232 |
232°C |
50 et 75µ |
1.5 to
3.1 m |
250 m |
Poor |
YES |
E, P, VE, EL |
| PO120 |
120°C |
75µ |
4, 6, 8,
10, 12 & 15 m |
+/- 800m² |
400 % |
YES |
E, P, VE, PH, EL |
*
resin code :
E = epoxy - P
= polyester - VE = vinylester
- PH = phenolic - EL
= elastomer - TP = thermoplastic. |
|
 |
 |
|
