Catalog
1x1mm open mesh bleeder fabric based on a PTFE-coated woven fiberglass fabric. Recommended for use in applications which require superior release characteristics, controlled porosity allowing very good air flow, especially in high pressure moulding in autoclave and high temperature (260°).
- Specifically designed for use in high pressure and high temperature moulding in Autoclave
- This PTFE glass mesh is a non-transferring release agent.
Width | Length | Thickness | Max. temp | Weight |
1.53 m | 30 m | 650 µ | 260°C | 520 g/m2 |
- PROCESS
- Oven
- Autoclave
- Vacuum Infusion