Catalog
DELRIN BLANKING PLUG |
|
CO-MM-005 | 3/8″ threaded plug | |
DELRIN 20mm blanking plug. 2 Rings INCLUDED (ref. MS-02-1625) |
INJECTION FITTINGS |
|
CO-XM-0311 | |
Use in conjonction with mould insert MM-0014 to connect a 6mm ED injection or vent pipe to mould. | |
CO-XM-0312 | |
Use to connect a 10mm ED injection or vent pipe. | |
CO-XM-0305 | |
XM-0405 connector included. To use with MM-0014 to connect a 10mm ED injection or vent pipe. |
THREAD CONNECTION |
|
CO- MM-003 | Raccord fileté 3/8″ mâle | |
To be threaded into MM-0002 insert. To reduce vent diameter. For use with 6mm pipe. |
QUICK PIPE CONNECTOR |
||
CO-XM-0405 3/8″ claw fitting |
For PE 10mm ED pipe. Assembled on XM-0404 & XM-0305 connectors. For PE 12mm ED pipe. |
|
CO-XM-0406 3/8″ claw fitting |
||
CO-XM-0407 1/2″ claw fitting |
THROUGH-HUL FITTING |
|
ACRAC-GEKA-PCOQUE | 3/4″ threaded fitting | |
Through-hull fitting QAC93 for vacuum device. |
HOSE END COUPLING |
||||
3/4″ female threaded fitting
ACRAC-GEKA-3/4F |
3/4″ male threaded fitting
ACRAC-GEKA 3/4M |
3/8″ male threaded fitting
ACRAC-GEKA-3/8M |
20mm grooved coupling
ACRAC-GEKA-MANCH |
10mm grooved coupling
ACRAC-GEKA-MANCH10 |
Female hose end coupling QAC94 | Male hose end coupling QAC95 | Grooved hose end coupling for 20mm ID hose. | Grroved hose end coupling for 10mm hose. |