INFUPEEL & INFUPLEX | Vacuum infusion systems

Simplify your vacuum infusions with all-in-one drainage complexes

Traditional infusion requires several layers of consumables (peel ply fabric, a release film and a draining mesh), making the process time-consuming, tedious, and prone to errors.
To simplify this process, DIATEX has developed INFUPEEL® and INFUPLEX®, two ready-to-use “all-in-one” technical draining systems.

This saves a considerable amount of time, ensure a consistent and repeatable extraction, and significantly reduce the use of consumables.

General Technical Specifications

Time-savings

A single application instead of several separate layers

Consistent surface quality

Uniform removal without excess thickness

Risk reduction in dry areas

Different drainage rates

Less positioning adhesive

Waste reduction and logistical simplification

Our Different Types of Resorts

Infuplex ®

2-in-1 complex: perforated release film + neet bleeder

Designed for vacuum infusion of composite parts, INFUPLEX® can also be used for compaction in molding.

2 layers in 1: perforated release film + neet bleeder

Average time savings: 20 to 30%

Available in several drainage speeds

Available in a grid pattern for quick installation of resin and vacuum channels

Checkered Infuplex®

Easy installation and guaranteed precision

To facilitate the installation of resin and vacuum ramps, DIATEX has developed a line of grid-patterned INFUPLEX® products.

The grid-based visual guides allow for quick and precise positioning, while preventing grid errors or areas that are not properly infused

Checkered Infuplex Isonet

Checkered Infuplex OM70

Checkered Infuplex Fasnet

Infupeel®

Multifunctional 3-in-1 complex

The INFUPEEL® film combines three essential functions in a single layer:

Pee ply fabric + perforated release film + neet bleeder

Average time savings: 40 to 50 percent on infusion cycles

Uniform harvest surface, free of residue

Our range of draining composite films

Infuplex

	Max. Temp.	Peel ply fabric	Release film	Neet bleeder	Total weight	Resin flow speed
Infuplex Isonet	90°C	No	Yes	Yes	146 g/m²	*
Infuplex OM70	90°C	No	Yes	Yes	200 g/m²	**
Infuplex Dianet 135	90°C	No	Yes	Yes	159 g/m²	***
Infuplex Flonet	90°C	No	Yes	Yes	132 g/m²	****
Infuplex Fasnet	90°C	No	Yes	Yes	205 g/m²	*****
Infuplex OM70 PA	200°C	No	Yes	Yes	255 g/m²	**
Infuplex Dianet PA	200°C	No	Yes	Yes	160 g/m²	***

Checkered Infuplex

	Max. Temp.	Peel ply fabric	Release film	Neet bleeder	Total weight	Resin flow speed
Infuplex Isonet Quad.	90°C	No	Yes	Yes	146 g/m²	*
Infuplex OM70 Quad.	90°C	No	Yes	Yes	200 g/m²	**
Infuplex Dianet 135 Quad.	90°C	No	Yes	Yes	159 g/m²	***
Infuplex Fasnet Quad.	90°C	No	Yes	Yes	205 g/m²	*****

Infupeel

Last Name	Max. Temp.	Peel ply fabric	Release film	Neet bleeder	Total weight	Resin flow speed
Infupleel Dianet PES90	210°C	Yes	Yes	Yes	259 g/m²	***
Infupleel Dianet PA80	210°C	Yes	Yes	Yes	239 g/m²	***
Infupleel Dianet PES107	210°C	Yes	Yes	Yes	264 g/m²	***