Net bleeders for composites

A solution for every need: speed, viscosity, and temperature

Drainage nets are used in the molding, compaction, and vacuum infusion processes.

They promote resin penetration into the fabric and allow the resin to flow evenly in all directions, ensuring rapid and uniform resin flow.

Our nets, specifically designed for vacuum infusion, are ideal for large-scale vacuum molding (e.g., boats using low-temperature prepreg).

General Technical Specifications

The Diatex range is suitable for all types of workpieces: thin, thick, monolithic, etc. The 200°C range is suitable for the most demanding aerospace resins.

Available in the Infuplex version (two-layer composite: drainage mesh + perforated film)

Learn more about the Infuplex version

Different resin creep rates: from slow to ultra-fast

Operating temperatures: 90°C to 200°C

Various weights available: from 115 to 220 g/m²

Our Different Types of Draining nets

Draining and compaction nets

Process: infusion

High-temperature draining and compaction nets

Process: Infusion and autoclave

Tested on most epoxy resins

Our range of draining nets

	Max. temperature	Material	Weight	Resin flow speed
Isonet	90°C	CO – PE	115 g/m²	Slow
OM70	190°C	PE	180 g/m²	Moderate
Dianet 135	90°C	CO – PE	135 g/m²	Fast
Flonet	90°C	CO – PE	112 g/m²	Very fast
Fasnet	90°C	CO – PE	170 g/m²	Ultra-fast
Fasnet V2	90°C	CO – PE	145 g/m²	Ultra-fast
Dianet PA	200°C	Polyamide	125 g/m²	Fast
OM70	200°C	Polyamide	220 g/m²	Moderate