Covering products (coatings, finishes, etc.)

Functions: For bonding, stretching, stabilizing, lining, and sealing your DIATEX 1000 / 1500 / 2000 interlining fabric to a wood, metal, or composite structure, or for bonding fabric to fabric.

Applications:

• Adhesion: 2 methods (Allow 1 hour for drying between coats): Apply 2 to 3 coats of undiluted Solo plaster using a flat brush, or apply with a roller after diluting it with Solo thinner (first coat diluted 50%, second coat 25%)
• Fabric tension: undiluted or diluted to 10%, 2 to 3 crisscrossed layers depending on basis weight

An organic blend based on ethanol, acetates, butanol, and dimethoxymethane, designed to optimize the application of SOLO

Improves the appearance and finish. Its thin consistency results in significant weight savings. Can be applied to coated canvas (light sanding), laminates (400-grit wet sanding), wood, metals, and composites

• 100% compatible with nitrocellulose coatings
• Excellent flexibility
• UV Protection
• Transparency to Ultrasound and Radar Waves
• Coverage: 6 to 7 m² per liter of mixture.

Apply directly to Diaplan (the two-component primer)

• Improves the aircraft’s streamlining thanks to its very smooth structure
• High coverage = weight gain
• High elasticity (no cracking)
• Resistance to UV, water, and crevice corrosion
• Spray application

A high-gloss, thin, and flexible PU clear coat. Ideal for enhancing the final finish and protecting the paint.

For sensitive areas: running board, footrest, pedals, luggage compartment.

• Resistant to ester oils (AIR 8104)
• Excellent coverage: 5–7 m²/L
• Color: matte midnight blue
• DASSAULT-Approved
• Various formats available: wide or narrow strips, round discs, foot-shaped pieces, and other designs upon request

Technology derived from the AIRBUS A380. It is a cost-effective replacement for 4/10 stainless steel sheet, saving 2 to 5 kg per aircraft.

• Very low thermal conductivity
• Excellent sound and vibration insulation
• Flexible, can be cut with scissors
• Installation Using Multi-Point Adhesive Bonding

Protection for interior and exterior metal surfaces. 100% two-component epoxy, pigmented with strontium chromate. Extremely high resistance to chemicals, salt spray, kerosene, oils, and hydraulic fluids.

Solvent-based degreaser, compatible with composites, metals, resins, and thermoplastics.

Removes wax and other surface contaminants without damaging or dulling the mold’s working surfaces.

• No traces or residues
• Dries very quickly
• Ideal for use before applying primer, base coat, or paint