Aeronautical fabrics

Conception controlled by Bureau Veritas according to standards and then continuously marked. This aeronautical fabric is sold and approved in Great Britain (CAA approval), Belgium (approved class A and B), Italy, Spain, Australia, U.S.A. (FAA) underway, 100 % thermo-shrinkable polyester (approx. 15 %).

Width : 195 cm
Weight : 125 gr/m²
Colors : natural colored
Tensile strength :
Warp direction > 2800 kg/m
Frame direction > 2200 kg/m

Directly derived from Diatex 2000, this aeronautical fabric has received in addition a special treatment. A better finish is obtained thanks to the application of easier coating paints and a stronger adhesion. So practically all black points and the “folds” well known by Pros are avoided...100 % thermo-shrinkable polyester.Technical data identical to that of Diatex 2000, except : 185 cm

Width : 185 cm
Weight : 132 gr/m²
Colors : white

Used in foreign countries in most cases for airplane canvas mountings. Very resistant, this aeronautical fabric is easy to install. It is lighter than Diatex 2000 and "consumes" less sealing compound. As a result less weight ! Its high-premium weaving assures an excellent finish, finer than that of Diatex 2000.100 % thermo-shrinkable polyester (approx. 15%).

Width : 195 cm
Weight : 86 gr/m²
Colors : natural colored
Tensile strength :
Warp and Frame > 1750 kg/m

Directly derived from Diatex 1500, this airtight fabric has received in addition a special treatment. A better finish is obtained thanks to the application of easier coating paints and a stronger adhesion. So practically all black points are avoided...100 % thermo-shrinkable polyester from 100° C.Technical data identical to that of Diatex 1500, except : 185 cm

Width : 185 cm
Weight : 89 gr/m²
Colors : white

Very fine thanks to its weaving and a special treatment, you will obtain a superb finish. 100 % thermo-shrinkable polyester from 100° C.

Width : 156 cm
Weight : 49 gr/m²
Colors : natural colored
Tensile strength :
Warp direction > 1000 kg/m
Frame direction > 850 kg/m

Airtight fabric Diatex 1000 + thermo-gluing film, for Reduced Models. Diacov 1000 assures a saving in weight, cost and mounting speed. And can be painted directly on top of. Thermo-gluable from 100° C on all kinds of supports (wood, cloth, paint, foam, aluminum, etc.), easy to apply, waterproof, good behavior to U.V. after painted. Very strong gluing strength ; doesn’t unglue under the effect of sunlight.

Width : 75 cm

Available only in special professional stores

Airtight fabric for CANVAS MOUNTING : product specially made for collectors, according to the standards Air 9211 and BS9F1/2.2.C.

Width : 137 cm
Weight : 143 gr/m²
Colors : beige
Tensile strength :
Warp and Frame : 1600 kg/m.

Aeronautical fabric for CANVAS MOUNTING : product specially made for collectors, according to the standard BS7F8/2.3.b. Corresponds to the grade A. 100 % Cotton.

Width : 122 cm

Weight : 140 gr/m²
Colors : beige
Tensile strength :
Warp and Frame : 1400 kg/m