Monofilament windbreak nets and shade netting

Discover our products

Tailor-made products

WINDBREAK NETS

DIATEX offers a wide range of windbreak nets, in 100 m rolls, with widths from 1 to 8 m depending on the product.
Some nets offer polyester eyelet holes along both edges as well as every 1 m.
Our windbreak nets are an effective response to bad weather conditions, such frost and ice, reducing wind speeds and increasing temperatures. They also prevent soil erosion and reduce plant desiccation.
They are quick to install (after simple weeding along the row) and help prevent the risk of crop soiling (for example, due to cypress leaves).
The shadows cast by windbreak nets are minimal in comparison to traditional hedges and the crop yield is therefore more homogeneous.
Made of monofilament low-pressure, high-density polyethylene (HDPE), they are UV stable and rot-resistant offering a cylindrical and completely aerodynamic thread form.
They provide significant resistance and are guaranteed to offer excellent durability.

The DIATEX “+”
DIATEX can provide all the installation accessories for your windbreak nets and can direct you to installation teams operating throughout France.
Lateral aeration nets for greenhouses
Windbreak nets can be used to create lateral aeration for tunnels and greenhouses, with the option of including doors or other specific requests. These reduce wind speeds while maintaining sufficient aeration and limiting fungal threats.
We offer crystal or light green colour nets to limit shadows.
Filets-d'aération-latérale-de-serres---protection-météorologique
Toiles-d'ombrage-haute-résistance---protection-météorologique High resistance shade canvasses
Monofilament nets offer a much greater mechanical resistance than strip-type shade netting.
They also provide very good protection against heavy rain by breaking up large water droplets, creating a misting effect. They also protect against  hail.
Our range includes nets that offer from 8% to 85% shading.

MONOFILAMENT SHADE NETTING

Monofilament shade netting
The DIATEX range includes nets that offer from 8% to 85% shading, in 100 m rolls, with widths from 1 to 6 m depending on the product.
Some nets have polyester eyelet holes along both edges as well as every 1 m.
Monofilament nets offer a much greater mechanical resistance than strip-type shade netting. They protect against hail and provide very good protection against heavy rain while remaining permeable to water and rain.
Filet d'ombrage monofilament

REF. WINDBREAK
COEF.
SHADE
COEF.
MESH OPENING COLOUR WIDTH LENGHT WEIGHT USE
F1028* 20% 18% 8 x 3 mm Light green 2.5 – 3 m 100 m 50 g/m² Recommended for lateral aeration
F1028Q* 20% 8% 8 x 3 mm Crystal 1 – 1.5 – 2 – 2.5 – 3 – 4 – 6 m 100 m 50 g/m²
2.5 m 300 m
F1026Q 35% 30% 5 x 3 mm Green 1 – 1.5 – 2 – 3 – 4 – 6 m 100 m 65 g/m²
F1032 50% 45% 3 x 2 mm Green 3 – 4 m 50 m 100 g/m²
4.5 m 75 m
1 – 1.5 – 2 – 2.5 – 3 –
4*** – 4.5 – 5 – 6 – 8 m
100 m
3 – 4 – 4.5 – 5 m 125 m
3 – 4 – 4.5 – 5 m 150 m
3 – 4 m 175 m
4 – 5 m 200 m
15% 3 x 2 mm Crystal 4 m 75 m
1 – 1.5 – 2 – 2.5 – 3 – 4 – 6 m 100 m
3 – 4 m 125 m
3 – 4 m 150 m
F1132** 50% 45% 3 x 2 mm Green 1.5 – 2 – 3 – 4 m 50 m 100 g/m²
0.75 – 1 – 1.5 – 2*** –
2.5 – 3*** – 4*** – 6 m
100 m
2.5 m 150 m
F1134** 65% 60% 2 x 2 mm Green 1.5 – 2 – 3 – 4 m 100 m 130 g/m²
FOM65 70% 65% 1.5 x 1. 7 mm Green 3 m 300 m 140 g/m²
FOM70** 75% 70% 1.5 x 1. 5 mm Green 1 – 1.5 – 2 – 3 – 4 m 100 m 180 g/m²
FOM80Q** 80% 85% 2.1 x 1.9 mm Green 4 m 100 m 210 g/m²

 *Offers polyester eyelets holes along both edges.
**Eyelet holes every 1m.
***Available in 50m.

WINDBREAK NET WITH INTERATED THREAD
A DIATEX INNOVATION
BRISE-VENT+FIL-intégré READY-MADE PRODUCT
Save time
Easy to installOur windbreak net with integrated thread
offers a windbreak solution at the standard heights: 1.50 – 2 – 3m. Also available in:

– 3.50 m (1.50 + 2 m)
– 4 m (2 + 2 m)
– 5 m (3 + 2 m).
2 m wire excess at each end for attaching
to posts.
The first and last 40 cm are not knitted, so
the net can be coiled onto the roller tube.

REF. COEFFICIENT MESH OPENING
COLOUR WIDTH LENGHT WEIGHT
WINDBREAK SHADE
F1132* 50% 45% 3 x 2 mm Vert 1.5 – 2 – 3 m 50 m** 100g/m²
*F1132 net with 5 mm integrated synthetic thread in each row of holes. **Except on special orders with tunraround time of 4/6 weeks.