INFUPEEL®

3 layer vacuum infusion complex

INFUPEEL® are multilayer systems used in manufacturing processes for vacuum infusion of composite materials.

The systems combine three vacuum consumables into a three-layer unit: a peel ply, a perforated film ELA20P0 permeable to resin and gases, a net bleeder on top.

There are 2 INFUPEEL versions, with 2 different peel ply :

  • INFUPEEL® DIANET PES90
  • INFUPEEL ®DIANET PA80

Used in manufacturing processes for vacuum infusion of composite materials.

De-oiled. Heat set. This easy-to-use solution eliminates the technical risk of overlap or of the omitted layer. Save time and optimise the production with INFUPEEL.

Ref. Global
weight
Net
bleeder
Perforated
film
Use with
resins
Resin flow
speed*
INFUPEEL
DIANET PES90
249 g/m² DIANET 135

135gr/m2

ELA20 P0

+ PES90

All resins

< 90°C

•••
INFUPEEL
DIANET PA80
239 g/m² DIANET 135

135gr/m2

ELA20 P0

+ PA80

All resins

< 90°C

•••

**• = Slow | • • = Average | • • • = Speed | • • • • = High speed
• • • • • = Very high speed

PROCESS
Vacuum infusion