Bagging films

Discover our products

DIATEX provides a wide range of bagging films for vacuum moulding and  vacuum infusion.

PA205 HF is a carved bagging film for the vacuum moulding of composite parts. Its 3D structure provides a perfect vacuum compacting and allows to take out the bleeder for compaction or vacuum moulding combinated to our Microporous peel ply. PA205 HF is a green bagging film as it enables using less peripheral device.

PA205HF

The nylon bagging film PO180 reduces waste. Used for vacuum moulding, it is available in lay-flat tubing and sheet, in 50 µ or 75 µ.

PO180

PO120 is mainly recommended for vacuum infusion of composite materials with advanced shapes.

PO120

Bagging films range

TEMP. VACUUM
ELONGATION
AUTO-RELEASE USE WITH
RESIN*
Oven Autoclave Vacuum infusion
PO120 120 °C 400 % YES E | P | VE | EL
DIABAG 80 135 °C 750 % E | PH | EL
PO150 XD2 145 °C 1000 % YES E | PH | EL
PO150 YJ 150 °C 400 % YES E | P | VE | PH
PO160 TUBE 160 °C 350 % YES E | PH
PO175 177 °C 365 % YES E | P | VE | EL
DIABAG 80 HT2 180 °C 650 % E | PH | EL
PO180 180 °C 360 % YES E | P | VE | PH | EL
PO180 TUBE 180 °C 360 % YES E | P | VE | PH | EL
PA205 205 °C Low YES E | P | VE | EL
PA205 TUBE 205 °C Low YES E | P | VE | EL
PA205 HF 205 °C Low YES E | P | VE | EL
PA232 232 °C Low YES E | P | VE | EL
PTFE260 260 °C Low YES E | P | VE | PH | EL
POLYIMIDE 400 °C Low YES TP
POLYIMIDE HM 400 °C Low YES TP

*E=Epoxy | P=Polyester | VE=Vinylester | PH=Phenolic | EL=Elastomere | TP=Thermoplastic