Site : http://www.diatex.fr
Diatex
56 Chemin des sources
69230 Saint genis Laval
Diatex
56 Chemin des sources
69230 Saint genis Laval
You are here
Diatex
> Our divisions
> Composite Division
> Products
> Vacuum moulding
>> PTFE and Silicone release interfaces
Products
PTFE and Silicone release interfaces
.jpg)
|
Porous or non porous PTFE coated glass fabrics, adhesive (silicone et acrylic) or non adhesive, bands or full Width Special PTFE products (seal, bands, treatment...). The non porous adhesive version is used as a release sheet for permanent removal of the components. The porous version is used as a release plee ply, and the screen version as a bleeder (autoclave application) |
 |
|
|
The 2 sides silicone coated paper 92 gr/m² Ref. PS2F85 is economic and ecofriendly. It replaces the PTFE coated glass fabrics and avoids using release agents.
This glossy release interface is easy to use thanks to its stiffness (no folds). It is suitable with all kind of resin. |
.jpg)
More than 50 reference are available : please contact us.
| Product | Max Temp. |
Width | Length | Weight | Porosity | Thickness | PTFE % | Finish | Adhesive option |
| V1PT76 | 260°C | 1/1.53m | 50m | 165 g/m² | Non Porous | 76 µ | 70 | Glazed | Yes |
| V7PT80 | 260°C | 1/2m | 30/50m | 140 g/m² | Non Porous | 80 µ | 67 | Standard | Yes |
| V7PT125 | 260°C | 1/1.53/2m | 30/50m | 250 g/m² | Non Porous | 125 µ | 65 | Standard | Yes |
| V7PT140 | 260°C | 1/1.53m | 30/50m | 290 g/m² | Non Porous | 140 µ | 65 | Standard | Yes |
| V7PT250 | 260°C | 1/1.53m | 50m | 490 g/m² | Non Porous | 250 µ | 59 | Standard | Yes |
| V4PT76.3 | 260°C | 1/1.53m | 30/50m | 65 g/m² | 240l/m²/s | 60 µ | 20 | Standard | No |
| G1X1 PTFE | 260°C | 1/1.53m | 30/50m | 530 g/m² | Stitch 1x1mm | 640µ | 65 | Scrim | No |
| G4X4 PTFE | 260°C | 1/1.53m | 30/50m | 460 g/m² | Stitch 4x4mm | 900µ | 65 | Scrim | No |
| PS2F85 | 240°C | 1.6m | 200m | 92 gr/m² | Non Porous | 78µ | NA | Silicone 2 faces | No |
