Vacuum line

DIABREAKER is a vacuum line made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube which maintains the vacuum all along the product.

  • DIABREAKER avoids over-consumption of resin by slowing down the resin as soon as the flow front gets into contact with it, while keeping the resin moving forward, and maintaining a good vacuum level.
  • DIABREAKER allows to drain entrapped air bubbles, to get fully infused fibers,
  • Thanks to ELA20 release film, the product is easily peeled off from the part during demolding operation.

Width Length  Max Temp.
100 mm 50 m 120°C
Vacuum infusion